GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 6 of 6

Thread: Schrick Cams and the m60 Engine

  1. #1
    Join Date
    Apr 2004
    Location
    Reston Va
    Posts
    459

    Default Schrick Cams and the m60 Engine

    Has anyone investigated doing headwork and Cams on a m60 engine? After the Manual transmission conversion..... I am thinking "gosh a little more power would be really neat with this latest mod".

    I would appreciate any thoughts or key learnings people have on the topic. - JT
    Johntee540
    1994 540/6 Black - Tan - 199k
    Cardomain Site: http://www.cardomain.com/ride/737181/1

  2. #2
    Join Date
    May 2004
    Location
    Hobart, Tasmania, Australia
    Posts
    86

    Default

    It is a good question and I have just posted a similar one of the German E34 site.

    If I find out anything I will post back here. I suspect it costs big dollars and that if you are looking to spend big $, most people conclude you get more hp per $ taking the supercharger route.

    But let's wait and see!

    Cheers

    Quote Originally Posted by Johntee540
    Has anyone investigated doing headwork and Cams on a m60 engine? After the Manual transmission conversion..... I am thinking "gosh a little more power would be really neat with this latest mod".

    I would appreciate any thoughts or key learnings people have on the topic. - JT

  3. #3
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    last I looked the cams alone were about 2500.00 US dollars. The gains will be in the 4500-7000rpm area, low rpm torque will fizzle. Dont remember anyone around here doing much in that area, I questioned it when I first wandered here too. The cam specifications between the 530 and 540 are the same too.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  4. #4
    Join Date
    Dec 2003
    Location
    PA
    Posts
    5,403

    Default

    For $2500 you could prob find an M62

  5. #5
    Join Date
    Dec 2003
    Location
    Kingston, Ontario, Canada
    Posts
    831

    Default

    Had looked years ago and came to the same conclusion...could probably pull 330-340 out of the motor but that's an expensive 10-12% power increase...

    Duey

    1995 540i/6 Sport Pkg w/E.A.T. chip and Nikasil injection Duey's Gallery

  6. #6
    Join Date
    Dec 2004
    Posts
    488

    Default

    Quote Originally Posted by Johntee540
    Has anyone investigated doing headwork and Cams on a m60 engine? After the Manual transmission conversion..... I am thinking "gosh a little more power would be really neat with this latest mod".

    I would appreciate any thoughts or key learnings people have on the topic. - JT

    Just find a nice used shorter geared LSD instead.
    -Trevor Ely

    '88 535is
    '95 M Sport 540i (1 of 200)
    '91 M5

Similar Threads

  1. cams?
    By Mike M in forum 5 Series BMW
    Replies: 9
    Last Post: 01-03-2006, 10:01 PM
  2. fast cams S38....
    By Jose in forum 5 Series BMW
    Replies: 3
    Last Post: 04-04-2005, 02:01 PM
  3. Fitting US M3 cams into M50 engine
    By albundy in forum 5 Series BMW
    Replies: 3
    Last Post: 05-28-2004, 03:12 AM
  4. Schrick cams on E34 540i
    By Jake in forum 5 Series BMW
    Replies: 13
    Last Post: 04-29-2004, 06:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •