Reply With Quotelook around on the net and you will find a step by step for hooking it to the line level inputs, i was dissapointed with the basslink i installed for a customer
3 Grand Master
::.. Hooking up Basslink
Has anyone hooked up an Infinity Basslink X10 to the stock amp? I have an opportunity to get one for under $150 CAD. Not going to mess around with replacing the stock amp or running another one.
Anyone wired one up? Straight forward? Hints? Diagrams?
5-10 Grand Master
look around on the net and you will find a step by step for hooking it to the line level inputs, i was dissapointed with the basslink i installed for a customer
all america wants is cold beer warm cat and a place to take a poop with a door on it
3 Grand Master
A little digging turns up this... I wonder if it's relevant...
AMP..........................|||........BASSLINK
1) LR + yellow.............|||........LR + green 3)
2) LC + blue/red..........|||........LF + white 7)
6) RR - brown (skinny)..|||........RR - violet/black 2)
7) RC - blue/brown.......|||........RF - grey/black 6)
9) LR - brown.............|||........LR - green/black 4)
10) LC - blue/brown....|||........LF - white/black 8)
13) RR + blue.............|||........RR + violet 1)
14 RC + blue/white......|||........RF+ grey 5)
The numbers for the AMP ie 1) are engraved in very tiny numbers on the amp's connector
LR = Left Rear LC = Left Center (BMWs term) LF = Left Front (Basslink's term) basically, LC (or RC) = LF (or RF) for this install the numbers for the Basslink follow the Basslink instructions for speaker level wire connections
Posting Permissions