Clean and check the temperature sensor on that side. Maybe the sensor is dirty and therefore the stepper motors are in a different position.
Feet were freezing today on the way to work. I pulled the glove box out and looked at all the cables. They are moving ok. Seems like I am getting more flow out the passenger side - as opposed to the drivers side. Any ideas on what to check/look for ? Airflow is good out the rest of the vents. Heater core was done about three years ago.
Thanks
Derek.-
Derek A.
90 535i 5 Speed - Style 5 17"
Clean and check the temperature sensor on that side. Maybe the sensor is dirty and therefore the stepper motors are in a different position.
change your freakin microfilter!
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
He doesnt have a micro filter.
Lowered with blue h&r(?) springs, Bilsteins, tint, 19# design 3 injectors, Dual Magnaflow
southwest WA
Is that the piece that plugs into the trim panel ?Originally Posted by shogun
Derek A.
90 535i 5 Speed - Style 5 17"
maybe that would explain it, clogged heatercore.Originally Posted by Alexlind123
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy