OT: How to drill a 1/16" hole through 2" stack of cardstock?

[Qube]

OT: How to drill a 1/16" hole through 2" stack of cardstock?

I have a drill press, but I'm quite certain that if I try to do it with a standard steel bit, I'll have one side of the hole very clean and horrible burrs on the other side. Any recommendations?

[gale]

Clamp them tightly together with a steel, aluminum, or wood plate on top & below the stack & drill thru & thru the whole business. The inner layers will all drill cleanly. At worst, only 1 or 2 layers at the top or bottom will have frayed holes, if at all.

[632 Regal]

I have a paper drill at work but i think the smallest drills only go to 3/32... call your local printer?

[Qube]

Clamp them tightly together with a steel, aluminum, or wood plate on top & below the stack & drill thru & thru the whole business. The inner layers will all drill cleanly. At worst, only 1 or 2 layers at the top or bottom will have frayed holes, if at all.

I'll try that tomorrow with some scrap boards. Thanks.