GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 2 of 2

Thread: Indicator Stalk

  1. #1
    Join Date
    Mar 2004
    Location
    Brisbane, Australia
    Posts
    418

    Default Indicator Stalk

    I bought a new indicator stalk and wiring loom off fleabay for my car but it must be from a later car because it's got different connections even though both cars have an OBC. The problem i had with my old stalk is that the cancel mechanism doesn't work when turning left so i was wondering is it possible to open them up and swap it over? It appears to be clipped together the whole way round.
    Attached Images Attached Images  

  2. #2
    Join Date
    Jan 2004
    Location
    Albuquerque, NM
    Posts
    953

    Default Indicator stalk

    I can't shed any light on the connector resolution. If you decide to open it up, play a hair dryer over the plastic housing to warm it up so the clips aren't as brittle. When you pry open the clips & separate the halves, do it inside a plastic bag so springs & parts don't fly all over. Take a few pic's before removing parts so you have a reference point for how things go back together. Those levers can be complex sometimes.
    gale
    92 735i 5-spd, turbo project finally underway!


Similar Threads

  1. anyone got a photo/diagram of the indicator stalk?
    By repenttokyo in forum 5 Series BMW
    Replies: 4
    Last Post: 04-03-2008, 03:24 PM
  2. New Full OBC, but my indicator stalk is not responding.
    By Calico_NC in forum 5 Series BMW
    Replies: 13
    Last Post: 10-16-2007, 05:32 PM
  3. Obc Remote/indicator Stalk
    By bmwrp8 in forum 5 Series BMW
    Replies: 1
    Last Post: 04-11-2007, 07:39 AM
  4. Indicator Stalk
    By Rory535i in forum 5 Series BMW
    Replies: 2
    Last Post: 11-23-2005, 11:28 AM
  5. Replies: 10
    Last Post: 05-16-2004, 08:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •