Anybody have the HP/torque graph for a '91 535i? Mark D???

[Robert K]

I used to have this info with some old Dinan info, but believe I threw it away years ago. Does anyone have a graph showing the torque and horsepower ratings of a standard 3.5 liter engine (mine's a 1991) that they could scan, or have a link to one that's posted on the net somewhere? Any help would be appreciated.

Grace and peace,

Robert K
1991 535i

[Martin in Bellevue]

Ha, I don't think anybody has dyno'd a stock 535. Here are a couple hippietown e34 dyno sheets from the archives.

Jeffery's last m30 with the metric mechanic head, cam & Bruno's maf.


Here's my 535 with maf & 284 regrind cam.


Here's Craig's slightly turbo'd 535.


http://www.bimmer.info/forum/showthr...light=dyno+535

[bahnstormer]

theres a stock one from finland or norway of something


ps the standard is 3.4L heheheh

[MarkD]

I used to have this info with some old Dinan info, but believe I threw it away years ago. Does anyone have a graph showing the torque and horsepower ratings of a standard 3.5 liter engine (mine's a 1991) that they could scan, or have a link to one that's posted on the net somewhere? Any help would be appreciated.

Grace and peace,

Robert K
1991 535i

Hi Robert,

I don't have a dyno chart for a stock E34 535i. I've finally got the dyno calibrated a few months ago so can make one, next time a good 535i is available. But I doubt that will be in the near future.

Mark