it took about 90 mins for the left side and around 45 mins for the right. This was my first attempt at it. Damm it's easy. Just remove the two 19mm caliper bolts and your almost there. I didn't bleed the brakes, just removed some brake fluid and put new stuff in. For my bedding in procedure, I drove around for 5 minutes to warm them up, then did around 12 60-10mph brake tests on full braking over a period of 5 minutes and then let it cool down for another 5, then stopped the car. I could smell the pads after I switched off the car. Should I bed them in tommorrow again, or will this be adequate?