GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 3 of 3

Thread: EML disassembly

  1. #1
    Join Date
    Jul 2005
    Posts
    6

    Default EML disassembly

    I have almost completely disassembled the throttle body but I can t figure out how to unscrew and remove the commutator off. There is a torx bolt and it just unscrews but will not release. I have to remove so I can check out the major play which drives the butterfly flap.
    Thanks Joe

  2. #2
    Join Date
    May 2004
    Location
    Japan
    Posts
    9,249

    Default EML disassembly?

    I assume you are talking about the throttling valve in design EML = without bowden cable.
    If so, maybe this helps
    http://www.e38.org/e32/throttles/BMWThrottles.htm
    http://www.bimmerboard.com/forums/posts/84595
    http://www.bimmerboard.com/forums/posts/83671

  3. #3
    Join Date
    Jul 2005
    Posts
    6

    Default Thanks Grand Master, just what I was looking for!

    Thanks

Similar Threads

  1. 5HP30 (AS560Z) Valve Body disassembly
    By shogun in forum 5 Series BMW
    Replies: 3
    Last Post: 08-03-2009, 07:40 PM
  2. E34 sport seats - disassembly help needed.
    By Jeff N. in forum 5 Series BMW
    Replies: 3
    Last Post: 01-22-2008, 10:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •