Haven't seen them pop off too easily, but they're not on there very firmly in the first place.Originally Posted by CheapCheap1
After spending 2 wk-ends (on the suspension components & the shock tower), I finally took out all the front wheels.
Guess what...I found the source that made a nasty clunking noise. Well, a missing clip on the frt-LH/Driver side brake caliper is the real culprit that makes this nasty noise. (Duhhhh, I could have found it earlier--because, since I got this car back in Apr '05, everytimes when I touch the brake or when the car hit a small bump, a soft clunk noise just come up from the front LH/Driver side.)
Don't know if the clip just poped out by itself or the indy forgot to put it back.
Anyone has any idea how much would it cost?
Anyway, I guess I will have pay a $tealer near my hood for this clip. Or, anyone have a spare clip laying around for sell? Pls PM me.
Peace...
'95 BMW-540i/Auto (ZF-5HP30)...NO reverse
"Original" Nikasil block (+ Fristo Lays Chip)
87+ K Miles
Haven't seen them pop off too easily, but they're not on there very firmly in the first place.Originally Posted by CheapCheap1
Bill B.
95 525i
You mean the anti-rattle clip is gone?
Yeah, that'd do it.
best, whit
Yes, the only clip - # 7 on ETK.
(Sorry, I can't paste the diagram.)
Well, at least, it calms me down a bit...b'cuz I thought either the bushing or one of those joints has gone south. (Though there is a cluck noise, the car is handling very smooth...no shimmy at all.)
Will see if I can get the part...
'95 BMW-540i/Auto (ZF-5HP30)...NO reverse
"Original" Nikasil block (+ Fristo Lays Chip)
87+ K Miles