Reply With Quotetoo many variables to give a cost. matters where and what kind of cylinder they get you...new or rebuilt, what their rates are etc. Call around and find out what parts their going to use first.
Major Contributor
How much should a brake master cyl job be?
At an indy of course.
Thanks,
J
Green Beret Special Ops
too many variables to give a cost. matters where and what kind of cylinder they get you...new or rebuilt, what their rates are etc. Call around and find out what parts their going to use first.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Grand Master
hey lads, just new to the site. Happy to have found it
Major Contributor
Thanks, didn't realize you can go rebuilt
Their labor is around 60 an hour. I just want to get a ballpark so i can be prepared. Its always better to let it settle in before hand. I used to hate picking the car up and have it be way more than expected... never a good feeling.
Major Contributor
I'm taking it a rebuild consists or new grommets and o-rings?
or is there anything else?
Major Contributor
for me, the rule of thumb is always go with new unless its so exspensive that it's goiing to keep you from doing other things to your car.
check BMA for the new/rebuilt price. figure two hours, maybe 3? i'm sure i could do it that fast with good tools and not a v-8 engine.
i also bet patrick at bma will know what goes into a 'rebuild'
3 Grand Master
Rebuilds
Usually contain all new rubber parts, pistons, check valves, springs and clips.
They just recycle the body and reserviors.
If you are brave you find kits and do it yourself.
Vee ave vays of dealing vid your kind...........
4 Grand Master
2 hours plus part.
Posting Permissions
