GO FISHING, use SLABSAUCE Fishing Attractant
Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: OT: Did someone say lowered?

  1. #1
    Join Date
    Jan 2004
    Location
    Albuquerque, NM
    Posts
    953

    Default OT: Did someone say lowered?

    I drive past this juiced Caddy almost every afternoon on the way home from work, finally stopped & took a picture for it's "cleanliness" value. He literally rests it on the ground when parked:


  2. #2
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    that gives a new meaning to "skid steer".
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  3. #3
    Join Date
    Dec 2003
    Location
    baton rouge, loserana
    Posts
    6,922

    Default

    that thing needs it's top chopped to get into proportion, TOO MUCH GLASS it'd look better if they didn't design the hood and trunk lines above the side glass, or side glass below the hood and trunk
    all america wants is cold beer warm cat and a place to take a poop with a door on it

  4. #4
    Join Date
    Dec 2003
    Location
    Central NJ - USA
    Posts
    1,540

    Default

    air bag suspension is the future
    my new LR3 has it from the factory...only not so low heheh

  5. #5
    Join Date
    Oct 2004
    Posts
    3,395

    Default

    aaaaaAAAh! nasty.

    Can anyone explain to me what people SEE in these cars? They're not even attractive...argh.

    I'm literally puking over here...gah!

    best, whit

  6. #6
    Join Date
    Dec 2003
    Location
    PA
    Posts
    5,403

    Default

    Quote Originally Posted by bahnstormer
    air bag suspension is the future
    my new LR3 has it from the factory...only not so low heheh


    The LR3 isn't an airbag suspenion, it's still hydraulic, same as my Disco II with ACE

  7. #7
    Join Date
    Oct 2004
    Posts
    286

    Default

    ya gotta luv it when someone would spend a grand on wheels, another grand on slamming the car to the ground, and then refuse to invest $40 in a missing door moulding. Right now there is an engineer in Detroit scratching is head saying, " we spent several days calculating spring rates and shock valving to determine a compromise between ride comfort and handling, and this guy decides a Cadillac should ride like Santa's sled." People never seize to amaze me with their ignorance and stupidity.

  8. #8
    Join Date
    Jan 2004
    Location
    Thunder Bay, Ontario
    Posts
    2,538

    Default They may appreciate a different 'style',

    Quote Originally Posted by pmlmotorsports
    ya gotta luv it when someone would spend a grand on wheels, another grand on slamming the car to the ground, and then refuse to invest $40 in a missing door moulding. Right now there is an engineer in Detroit scratching is head saying, " we spent several days calculating spring rates and shock valving to determine a compromise between ride comfort and handling, and this guy decides a Cadillac should ride like Santa's sled." People never seize to amaze me with their ignorance and stupidity.
    but "ignorant and stupid", maybe you should give them a call or check their credentials to determine that one. If he/she enjoys the project/result and isn't $hitting on your ride, let them be happy. I’ve seen some nasty crap, but don't need to be childish about it. Beauty is in the eye of the beholder, in a perfect world

    No offence intended,

    Dave M

    Dave M

    10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
    *RIP Oskar the DOG *

  9. #9
    Join Date
    Dec 2003
    Location
    Central NJ - USA
    Posts
    1,540

    Default

    i seriously doubt any engineer in detroit was capable of creating a decent suspension heheheh
    jk of course they prolly know what they're doing, but that car has an
    adjustable suspension that'll raise and lower it, so its not ruined per se

  10. #10
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,839

    Default

    Thats the good side PML!

    I do admire that missing moulding though... was so astonished at the look I didnt see that!

    (I still wouldnt get cought pimpin in that sled)
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

Page 1 of 3 123 LastLast

Similar Threads

  1. at last, lowered
    By nizmainiac in forum 5 Series BMW
    Replies: 16
    Last Post: 03-21-2007, 12:06 PM
  2. Lowered cars suck
    By Anton CH. in forum 5 Series BMW
    Replies: 39
    Last Post: 02-03-2007, 07:30 PM
  3. Question for those of you that are lowered.
    By liquidtiger720 in forum 5 Series BMW
    Replies: 6
    Last Post: 04-03-2006, 09:14 AM
  4. Lowered E34 530i
    By gviloria99 in forum 5 Series BMW
    Replies: 41
    Last Post: 03-26-2006, 09:27 PM
  5. Lowered/ locking issues
    By Nick H in forum 5 Series BMW
    Replies: 3
    Last Post: 04-02-2004, 09:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •