Ihkr --> Ihka

what do i need to retrofit my A/C sistem ?
I have the IHKA computer .
I need the control pannel ........ ?????


THANKS

The system is completely different, the IHKA has all automatic valves. Here are more than 70 pages describing it. In German language, but the pics will show you.
Probably then you will give up.
http://www.gunnar525.de/screwings/ihkr-ihka_umbau.pdf

Thanks


I give up :))

So , I successfully retro-fitted the IHKR with the IHKA :)
It cost me 70 $ :) I bought the heater and A/C IHKA , the automatic A/C control and the computers :)

Tell us more.....
How long did it take to do that job?
More pics?
What were the difficulties?

some pictures :)

Quote:

---

Originally Posted by shogun

Tell us more.....
How long did it take to do that job?
More pics?
What were the difficulties?

---

It take me 2 days . To retro-fit the IHKR with the IHKA you need to take out the front interior ( this was a difficulty ) , the ventilation pipes . Then you need to unscrew 5 screws and voila the old IHKR is free :) then you need to pull her out and to replace it with the IHKA :)



P.S. if you had A/C you need to unscrew the A/C pipe :)

and your verdict on the benefits of IHKA vx IHKR?As an IHKA "owner" i dont hink i would miss it if I had IHKR,apart from the tidy dashboard :)

Quote:

---

Originally Posted by Paul in NZ

and your verdict on the benefits of IHKA vx IHKR?As an IHKA "owner" i dont hink i would miss it if I had IHKR,apart from the tidy dashboard :)

---

a benefit is that now i have windscreen and side windows defrosting :) the air distribution it s now electronic :D etc...

nice job man. i allmost bought it from bossko a few months ago, nice to see it being put to good use.

Quote:

---

Originally Posted by skr

nice job man. i allmost bought it from bossko a few months ago, nice to see it being put to good use.

---

Thanks :D