Technical specs for the cam in the M30??
Does anyone have the technical specifications for the stock M30 b35 camshaft?
Bill - is this Boring Guy Stuff? :)
I'm looking for the following:
intake and exhaust lobe valve opening angles for 050 lift
intake and exhaust lobe valve closing angles for 050 lift
degrees of lobe separation
not as important but interesting - max valve lift
I'm assuming these are symmetric lobes, correct?
Thanks!
Jeff
Nope, I don't have it in the boring guy stuff, but if you find out let me
know too if you don't mind.... intake lift, exhaust lift, duration intake and exhaust, overlap exhaust, and they look like symmetric lobes to me... If you guys have a spare cam you could degree it out yourselves and meaure the lift and duration....All you need would be to mark off the cam gear in degrees, some v Blocks to set the cam in on a flat surface and a dial indicator that would measure in .001 inches up to say 1 inch of travel...
Quote:
Originally Posted by Jeff N.
Does anyone have the technical specifications for the stock M30 b35 camshaft?
Bill - is this Boring Guy Stuff? :)
I'm looking for the following:
intake and exhaust lobe valve opening angles for 050 lift
intake and exhaust lobe valve closing angles for 050 lift
degrees of lobe separation
not as important but interesting - max valve lift
I'm assuming these are symmetric lobes, correct?
Thanks!
Jeff