PDA

View Full Version : Quick question: To clean ICV on m50, does the intake manifold have to be removed? NT



Anton CH.
02-14-2004, 11:24 PM
Nt

ryan roopnarine
02-14-2004, 11:32 PM
its just a pita to get it out without breaking the clip holding it in.

Anton CH.
02-14-2004, 11:34 PM
No worries, mines is already broken. Just can't recall the icv location from memory.

ryan roopnarine
02-14-2004, 11:39 PM
thing that would be attached to the snorkel hose coming off the intake manifold here, and the silver oriface in the bottom half (is it)http://plaza.ufl.edu/rroopnar/IM000354.JPG

Anton CH.
02-14-2004, 11:42 PM
Oh shoot, the injectors need to be removed for that? Job looks messier by the minute.

ryan roopnarine
02-15-2004, 10:45 AM
that's just a pic i took when i was trying to do my headgasket, its just clearer than if the intake manifold were (fixed) normally in position. no removal is necessary, just small hands.

Bill R.
02-15-2004, 11:37 AM
Check here (http://www.koalamotorsport.com/tech/misc/idle_valve_replacement__m50.htm)








Nt

Anton CH.
02-15-2004, 01:31 PM
Intresting aproach, thanks for your help guys!