M50 Vanos Tool Drawings

[shogun]

From AndrewBird: A few weeks back I rented the tools to work on the vanos on my M50. I took some measurements and made some drawings of them so they could be replicated if anyone felt ambitious. I also included a drawing of the one-piece style cam lock tool described in the Haynes manual.

Right click -----> Save as.
http://img838.imageshack.us/img838/6619/o2t.pdf
Here is my one-piece tool and my simplified flywheel lock pin that I made:
http://img62.imageshack.us/img62/2083/v0ee.jpg

Made the locking block from 3/8" thick aluminum.

Enjoy!

[genphreak]

That's some nice toolage there! Something or every modern and semi-ambitious M50 owner ;-)

Of course a real bimmernut would achieve the same in-between beers with his bare hands (NOT)